How to trim claws dog at home?

The dog’s manicure is not only useful from an aesthetic perspective, but it is also absolutely necessary from a medical point of view. The normal development of the animal’s claws saves his health by contributing to the preservation of the correct gait and laying down of the paw, developing muscles, joints, spine and bones. Long nails can interfere with a dog’s proper development and lead to serious deviations or diseases.

Anatomical features of claws

The dog will be able to choose the type of claw shape before starting the procedure. There are three types: curved claws, in the form of an arc; straight (analogue of the holy), more elongated than the first and often sharp; a little curved, with a slightly curved ends, like cat’s claws.

Important! In most breeds of office dogs, claws come in three types. The second type is characteristic of decorative rocks.

All dog claws have a fundamental design. From the outside, they are covered by a keratinous cover (visible part). The inner part called the clawed lies houses blood vessels and nerve fibers; these can be injured extremely undesirable during haircutting process. This may be most seriously injured by pet animal. The cogt vessel is noteworthy because it develops with claws. The more Claw, the longer Vessel becomes closer to end of Claw. This can be avoided regularly causing his pet. It is clearly visible to Kogt vessel in feline animals With dogs, situation somewhat more complicated since they can b bright and dark claws In latter case ,vessel practically not visible.

Option one: The best way to treat a dog’s claws is to cut them so that the dark part of the claw is shortened by 2-3 mm below where it meets the vessel (the blood supply in the claw). This should be done very carefully, taking no more than 0.5-0.7 mm per “step” so as not to cause pain to the dog. With constant care, this will ensure that the length of each pulp within each claw is shortened depending on how frequently you perform this procedure.

The procedures that were done afterward became easier and safer.

Why do you need a haircut?

On average, dog claws should be 2-8 mm long from the floor. Longer nails can cause discomfort and diseases in animals, as they are not naturally worn down on hard surfaces. Untreated wounds often lead to inflammation. Claws that are too short also cause problems for dogs, as they interfere with movement and can deform bones or even injure the spine.

Non-dimensional claws can break and lay, and their sharp edges can hurt children during gaming competitions or workouts. Similarly, dogs can spoil furniture, things or an elegant flooring while he is strongly “clay” when walking.

How often to cut?

How often do you need to cut your dog’s claws, and is there any need to change scissors to other devices? To properly care for your cognce plates, they should be shortened every two weeks. Usually, experienced dog breeders carry out the procedure based on a visual inspection and assessment of their animal’s claws. The essense of the question is that how often you cut your pet’s nails depends on its breed, size, age and activity level – with more frequent walking necessitating less frequent pruning.

There are a number of signs that can indicate that a dog needs their claws trimmed. If the dog has been walking differently or having difficulty getting around, it’s likely time for a claw trimming appointment. A responsible pet owner will always be aware of when their furry friend needs special care.

Required tools

Traditional scissors or plugs for shortening claws in dogs are not suitable, because, especially in adults of large breeds, claws are large and strong. Incorrectly selected tool can contribute to splitting or tearing of the claw. For these purposes, there are special chanthers [clipping tools], which are divided into the following groups: special scissors made of solid and durable metal with enhanced design; special nippers; guillotines.

If you are a large person, use a guillotine. If you are small, use specialized tools

The corresponding toolkit is made of high-quality stainless metal or has a non-slip coating. The handles are better to choose ergonomic, comfortable to prevent awkward movements and injuries. Blades should be hidden with high quality, eliminate chips, jar and uneven edges. Often the process of trimming claws using rods is replaced with grinding on special grinding machines that vibrate strongly and are very noisy – this can scare the animal more than any other tool. Claws requires more time and patience than trimming nails, not every animal will stop in one place for this to be done safely so preparation for circumcision usually requires an individualized approach that takes these factors into account.

It is important that the specified procedure not be associated with a pet that has scary or threatening items. Otherwise, the procedure will become painful for pets, and for their owners.

In addition to knives, when caring for nails will be needed and saws to smooth out defects in the plates obtained during their cutting. Picks are produced in manual and electrical versions. Usually, complete electric devices have nozzles of various rigidity, which are easily inserted into the rotating head of the device. Such a device is convenient to use: you can stab nails with it and give them the desired form. The average price for high-quality picks varies within 700-900 rubles (there are models up to 2000 rubles).

If you compare the cost of a one-time visit to the veterinarian with the benefit of an independent procedure, then the benefit of the independent procedure becomes apparent.

How to choose cunter?

Experts recommend purchasing specialized nippers (claws), specifically designed for dogs. It is not worth choosing models from the most affordable and cheap products. If you value the health of your dog, the tool must meet high quality requirements and meet the individual peculiarities of your pet. Therefore, when selecting a nipper, you should be guided by the following recommendations: pay attention to the material from which it is made (preferably steel or brass); its construction should be cast, with flared locations; Blade coating is better in chrome-plated version, otherwise it will begin to rust; handles of product must rubberized and convenient since procedure isn’t fast – metal handle can be inconvenient; it desirable that tool fully corresponds size claws & breed characteristics.

We produce three types of devices to restrain dogs, intended for small, medium and large dogs. However, universal devices are not quite reliable, so it is important to select a device that is tailored to the individual parameters of the animal.

Procedure

Passing the pet for trimming claws, it is best to start gradually, with one or two plates. The toolkit should be pre-measured. Before starting the procedure, it is advisable to give the pet a chance to sniff the tools and get acquainted with them. At home, you can properly cut a claw on an animal – by following a systematic step-by-step instruction that causes minimal protest from any breed of dog. You will need all of the necessary tools and means which include: sandpaper grain set cotton sticks and disks antiseptic compositions first aid kit treats for dogs If at home there are conditions conducive for relaxation (such as comfortable sofa chair etc.), then this is where you should perform cutting nails activity otherwise go down on your fours on floor . It’s preferable if before carrying out this ritualistic act you feed your furry friend so she would be in good spirits however don’t shout or cause anxiety that may disturb her tranquility; because ultimately your calm.

After the preparatory stages are completed, you can move directly to implementing the procedure, guided by these recommendations: if your dog has long hair, remove any wool from around its claws; also rinse and sweeten its limbs; examine each paw and decide where to make the first incision; securely fix which fingers will be clawed and determine exactly where on each digit not to cut; clip off just enough claw so that it is slightly higher than nerves or blood vessels running through them – doing this in two stages with a break between them. If live tissue is encountered during the procedure, calm your pet down. If Timets becomes agitated, hostile or whines excessively during surgery, take it back to see a veterinarian or reschedule for another time.

Problems

The problem moments that can occur when performing a circumcision on an animal usually relate to two things: the dog is afraid of the procedure and may break free and bite; or during the procedure, a dangerous injury can be inflicted.

Instructions on how to properly trim the claws of a dog:

1. In order to avoid any potential problems, it is important to follow these simple tips and rules: – Do not perform any trimming until you have examined the plate carefully;

– If the fur is getting in the way of inspection, then they need to be coated with a special product first;

– If the animal becomes restless during this procedure, then one of its assistants should keep it restrained firmly; he/she should hold its neck reliably while fixing its head, and at the same time keep its limbs from moving too much;

2. This method of retaining pets for claw clipping is both reliable and practical – especially in extreme cases when an animal tends to move around excessively; furthermore, it is important that puppies are taught this procedure from an early age so that they can get used to innovations more easily;

3. Another benefit associated with using plates attached hindlim.

If your dog sustains an injury to a paw, follow these steps: tie up the injured paw with a bandage or bundle harness; raise the injured paw to slow down bleeding; apply cold compress (ice pack) products from the freezer; treat open wounds with lidocaine. If necessary, sew wound by contacting specialist. Do not cut plates at once on entire possible length – dark claws should be trimmed by about 0.5 mm per 1 “step”. Before applying ice to wound, put it in bag and wrap thin cloth which will save animal from supercooling.

If you’re visiting a veterinary clinic with your dog and they’ve been given a sedative beforehand, ask the veterinarian if they can cut the dog’s claws while they’re there. Most veterinarians will do this for free.

Possible mistakes and complications

Errors and difficulties during the implementation of the dog claw haircut procedure are not so rare. Often they are connected with the behavioral features of animals, and with the individual characteristics of the color and anatomical structure of claws. In this context, it is important to take into account a number of factors. If an animal has dark-colored claws (black nails), which makes them difficult to trim, a veterinarian consultation should be obtained before proceeding. However, it may be helpful to visit him in order to watch his work as an example for future independent attempts at nail clipping. If a dog becomes agitated or resistant during treatment and does not allow their paws to be trimmed, then in most cases it is necessary to use cautery (burning) on their skin surface (for small animals). Two people usually participate in this type of procedure – one person holds onto/restrains the pet while another cuts its nails using appropriate tools.. if thge animal breaks away from restraint mid-treatment or behaves aggressively.

It is important to avoid open wounds in dogs as a result of any procedures. If one does occur, it’s necessary to provide medical care quickly. This includes hemostatic powders, corn starch, soap, hydrogen peroxide and chlorhexidine for disinfection. Bandages or napkins can also be helpful.

When the animal is injured, it needs to calm down. After disinfection, sprinkle a powder or starch on the injury but do not rub it – this will make the situation worse.

If the injury is minor, it is disinfected with peroxide or chlorhexidine. often a special hemostatic pencil is used, which is pressed against a damaged clawing area for a few seconds. The pencil helps form a dense clot that impedes bleeding. In the course of first aid, it won’t be superfluous to offer your pet some kind of treat to distract it and prevent the development of negative emotions about the procedure for trimming claws.

Animal should be left alone and quiet for 20 minutes to avoid further bleeding.

Incorrect or negligent nursing habits can lead to a number of unpleasant consequences, such as the development of an impervious “fifth finger” caused by excessive growth of the claw into the pillow on a dog’s paw. This condition disturbs skin coverings and results in increased susceptibility to bacterial infection and fungus. Additionally, an animal experiencing pain from infected claws may not be able to get up on its paws, leading to cogied bed (Panariums) – a disease characterized by fingers that are inflamed and covered with pus and blood. Other common symptoms include elevated body temperature, decreased appetite and foul smell emanating from the wound site. In severe cases where there is excessive length present on the claw, this digit can tear through blood vessels causing significant bleeding.

Some owners can cure their dogs’ emerging painful states on their own. So, with early inflammation of the clawed bed, there can be quite regular antiseptic treatment of a solution with a Solution of chlorhexidine. At the same time it is useful to impose wound-healing bandages that need to be periodically changed and monitored for safety. You can use a special veterinarian cap until the wound heals.

When caring for animals, it is important to remember that if you don’t trim their claws regularly, they can develop joint violations and deformities in their paws, which will cause them pain and long-term diseases.

Sometimes you have to make operations to remove claws in order to save the life of a pet. Such indications include the following: Ingrown claws – complicated cases; incorrect development of claws, struck claws; occurrence of gangremen and other serious consequences; serious injuries and inflammation, frostbite and burns; oncological processes. And also remove the so-called wolf claw (“Finger” ) – Rudimentary claws. Operations correspond to breed standards. In developed countries, however, this operation is condemned by human rights defenders as cruel.

Leave a comment
Stay up to date
Register now to get updates on promotions and coupons

Shopping cart

×